Geogrids

For road construction, parking lots, and site development projects where weak or variable subgrade soils threaten the long-term performance of aggregate base courses, the Mirafi BXG Geogrid delivers proven reinforcement and stabilization at the subgrade interface. By mechanically interlocking with compacted aggregate fill, the BXG creates a stable, load-bearing composite layer that limits lateral aggregate movement and reduces the stress transferred to the subgrade below.

The BXG is a biaxial geogrid, meaning it provides reinforcement in two directions simultaneously, making it effective for applications where loads are applied from multiple angles and directions. This makes it particularly well suited for base course reinforcement beneath paved and unpaved roads, parking areas, and construction access routes where traffic loads are distributed across the surface in varying patterns.

Not all subgrades are created equal, and neither are BXG geogrids. The BXG110 Type 1 and BXG120 Type 2 each bring different aperture sizes and tensile strengths to match the specific demands of your site, and GETSCO’s Geo Product Specialists can help you determine the right fit before the first roll hits the ground.

When a project calls for soil reinforcement that goes beyond base stabilization, the Miragrid line delivers the high tensile strength needed to build retaining walls, stabilize steep slopes, and support embankments over soft or compressible soils. Engineered for uniaxial and biaxial reinforcement applications, Miragrid geogrids work by mobilizing the strength of the surrounding soil, creating a reinforced mass that behaves as a stable, cohesive structure capable of handling significant lateral and vertical loads.

Miragrid geogrids are a standard specification on mechanically stabilized earth walls, tiered retaining structures, steep slope construction, and embankment reinforcement projects where engineered fill must be held in place under sustained loading. The high-tenacity polyester construction of the Miragrid line provides the stiffness and creep resistance required for long-term structural applications where performance cannot degrade over time.

The full Miragrid line, from the 2XT through the 24XT, is available through GETSCO, covering a wide range of tensile strength requirements for light-duty to heavy-load reinforcement applications. GETSCO’s Geo Product Specialists work closely with engineers and contractors to match the right Miragrid product to the design loads, wall height, and soil conditions of each project.

Some of the most challenging retaining wall and slope applications are not just structural problems. They are visual ones too. The Miramesh line of biaxial geosynthetics was developed for permanent mechanically stabilized earth wall and slope applications where long-term structural reinforcement and a green, vegetated finish are both required. Where hard-faced walls are not permitted, not preferred, or simply not appropriate for the surrounding environment, Miramesh delivers the reinforcement performance of a structural geosynthetic with a face system that supports live vegetation.

Miramesh products combine a high-strength biaxial geosynthetic with a welded wire face form that holds soil and seed in place while vegetation establishes. Once the vegetation takes hold, the planted face becomes a permanent, self-sustaining green wall or slope that blends into the surrounding landscape. This makes Miramesh a preferred solution for highway departments, land developers, and environmental engineers working on projects where aesthetics, environmental sensitivity, or regulatory requirements call for a naturalized retaining structure.

Whether your project calls for the Miramesh GR or the Miramesh TR, GETSCO has you covered. Our Geo Product Specialists will size up your wall height, slope angle, and site conditions and put the right product in your spec before the first shovel breaks ground.